BGE Owings Mills –
Structural engineering services for a 9,600 sq. ft. mezzanine expansion at the
existing BGE Facility in
LifeLike Products Facility –
Structural engineering services for rebuilding the 50,132 sq. ft. Patapsco
Molding Facility with a 2,000 sq. ft. mezzanine, two additions which include a
free standing 6,000 sq. ft., 4 hour blastproof structure and an attached 2,400
sq. ft. addition, as well as a 41,600 sq. ft. attached addition located in
Baltimore, MD.
Global Crossing: Point of Presence - Structural design of 6,234 sq. ft., 2-story
telecommunications facility, located in
Global Crossing - Structural design of 44,000 sq. ft. renovation for
a telecommunications data center, located in
Buck Distribution - Structural design of 158,400 sq. ft. warehouse
slab on grade with an additional 24,500 sq. ft. office, and a 5,000 sq. ft.
ancillary space on second level. A separate maintenance building is also
included totaling 4,750 sq. ft.
ESAC Water Tank - Structural design of repairs to deteriorated
concrete water tank building. Also included is the visual review of the concrete
slabs and walls of this facility to determine the extent and type of concrete
deterioration that needs to be repaired.
Barringer Foreman Technology Park Flex
Buildings - Structural design of
a one (1) story
Marley Neck Industrial Park, Lot 3R,
Buildings A&B - Structural
design of two tilt-up warehouses with a clear height of 32'-0" located in
Anne Arundel County, Maryland. Two (2) mezzanines are constructed for Building
B which are approximately 3,000 sq. ft. each. No mezzanines were planned for
Building A. Building A consists of 194,450 total sq. ft. and Building B
consists of 301,600 total sq. ft.
Display Craft - Structural evaluation for the proposed repair of
the north building retaining wall. This included the construction of a tie back
system from the interior of the building by a specialty design-build contractor
and the repair of the cracked/displayed masonry walls and structural building
component that were damaged by the movement of this north masonry wall. This
project is located in
The
Goldwell Cosmetics - Structural design of 130,000 sq. ft. manufacturing
facility and 35,000 sq. ft. headquarters office building for global cosmetics
company, located in
G. Heileman Brewery - Structural design of 130,000 sq. ft.
pre-engineered metal building bottling distribution facility.
Bomarco Paper Company - Structural design of a single story,
pre-engineered metal building paper manufacturing plant totaling 112,000 sq.
ft., located in Queen Anne's County, MD.
Fellowes Manufacturing Co. - Structural design of 72,000 sq. ft. pre-engineered
metal building paper manufacturing plant in
Oxychem - Structural design of shoring supporting columns
and beams during concrete restoration.
A.M. Spice Chili Cooker - Structural design of two (2) level 10,000 sq. ft.
mezzanine in existing building, located in
Amvax Walkable Ceiling - Structural design of 20,000 sq. ft. mechanical
mezzanine grating over metal stud joist, located in Prince George's County, MD.
D.J. United Iron & Metal - Structural design of 10,000 sq. ft., one story
addition to existing recyclable storage facility, located in
Gamse Lithographing Co. - Structural design of 13,300 sq. ft. addition for
existing lithograding facility, located in
Johnson Wax - Structural design of 10,000 sq. ft. building
addition for support of 13,000 gallon tank, located in
Nevamar - Structural analysis of existing cranes, hoists,
pipe supports, etc. at existing manufacturing facility, located in
Office of Traffic Complex - Structural design of 2-story, steel framed office
building and two (2), 1-story warehouses for Anne Arundel County Maintenance
Operations, located in
UMAB Operations & Maintenance - Relocation of operations/maintenance facility for
entire UMAB campus to existing parking garage.
Westinghouse Reverberating Acoustical
Test Facility - Structural
design detailing of a one (1) story steel frame which encloses the acoustical
chamber.
Sherwin Williams - Structural design of tank slabs, pipe supports,
catwalks, stairs, etc. for existing manufacturing facility, located in
Westvaco - Structural design of tank slabs for various
existing manufacturing facilities in the